#246a: A 9 speed 11t?
After today’s ride, I had two main problems to address. I have not been able to use my 11 tooth sprocket (it tends to skip to the 12t). No amount of adjusting of limits and cables fixed it. I had been thinking it was due to the Wipperman Connex link in my DA chain. To test out a theory, I switched out wheels putting my 11-26t equipped race wheel… No problems with 11t skipping. So it wasn’t the chain/master link.
I decided to take apart the cassette and clean it and reseat it. That is when I noticed an odd stamping on the 11t sprocket: “9s”. Checking some other cassettes, they all said “10s”. I am not sure how I got a SRAM 9-speed 11t, but there it was.
[SRAM 1070 10 speed cassette with 9 speed 11t]
[normal 1070 cassette before I cleaned it]
[...] last weekend. Today, it seemed to be worse. I almost forgot about it after I figured out the 11t shifting issue, but after I took things apart, something seemed a bit off when pulling the bolt on the non-drive [...]
Pingback by roadcx.net » #246b: FSA non-drive metal insert separation — April 11, 2009 @ 5:43 am